FlexConnect 10cm LED Strip module. Fully flexible with waterproof epoxy coating, these strips are compatible with the following Flexconnect products:

- Inside Corners
- Outside Corners
- All Interconnection cables
- Wireless Dimmer and Remote
- In Line Switch
- 48w and 72w Drivers


Each metre of strip consumes 4.8w of power so you can create a chain of strips to a maximum length of 15m (assuming you use the 72w Power Supply - remember this is the length of strip used - you should not include interconnecting cables in this calculation.


Please Note! Due to minimal demand the Blue option is supplied on the original copper-coloured PCB - NOT white as shown in the photo.

Technical Specifications

Power Consumption : 0.48w
Operating Voltage : 12v
LED Type : 3528
Operating Temperature : -20 to 55c
LED Density : 60 per metre
IP Rating : IP65 with epoxy backing
Cut points : 100mm
Self Adhsive : 3m Tape backing
Beam Angle : 120 degrees